XIGMATEK PURE BLACK EDITION ON CLASSIC CHASSIS
„Midgard-W” - home of mankind and protected by Thor, God of thunder, and his hammer. Signalizing the strength of diviness and mercy, but at the same time proprietaring the hardware you built in. Combined design and features such as black coated SECC and steel mesh are spotlighting your chassis when your system is built. Furthermore this chassis is supplied with 2 x 120mm pre installed fans (orange blade and black, transparent housings), but another 5 fans can be mounted in different areas for best possible airflow. 5 x 5.25" bays will be able to house all your optical drives, but also 5 trays for your 3.5" and 2.5" HDDs are available so you can feel free by "DIY". Tool free design and a "gorgeous" outlook are only a few points why this chassis is a "must" not only for enthusiast but also for pc beginners.
- Screw-less tooling for 5.25" bay installation.
- Screw-less tooling for expansion slot installation.
- Screw-less tooling for 3.5" bay installation.
- Preinstalled 120mm front and rear fans with white LED.
- Seven cooling fans are available.
- RPM speed control knob for three fans.
- Back window for easy CPU cooler back plate.
- Support water cooling system.
- Diamond cut surface aluminum I/O and reset buttons.
- Bottom PSU location for face-up and down installation.
- Anti-vibration rubber for PSU.
- Dust filter for intake airflow.
|
5.25" screw-less device holder on both side.
|
HDD tray with anti-vibration rubber and suitable for 2.5" and 3.5" HDD. |
Add-on card screw-less clips.
|
Window for CPU cooler backplate easy installation. |
PSU location on the bottom with anti-vibration rubber.
|
Three fans synchronous RPM controller. |
PSU could be installed downward and upward. |
Removable intake airflow dust filter for PSU. |
Upper fan space and preinstalled rear 12cm fan. |
Removable intake airflow dust filter for front fan. |
Bottom fan preinstalled frame.
|
Four water pipe holes for future liquid cooling system. |
Power Panel |
I/O Panel |
Front View
|
Rear View |
Side View |
Angle View |
|
 |
|
 |
|
|
MIDGARD-W
|
|
Product Number
|
CPC-T55DB-U02 |
|
Dimension
|
Main Unit: 206 x 510 x 477 mm / 8.1 x 20.1 x 18.8 inches
Box: 258 x 560 x 583 mm / 10.1 x 22.0 x 23.0 inches |
|
Drive Bay
|
5.25" External x5 (One bay with 5.25" to 3.5" adapter, tool-free)
3.5" Internal x5 (Tool-free) |
|
Expansion Slot
|
7 slots (tool-free) |
|
Motherboard Support
|
ATX, Micro ATX (with easy back plant installation window) |
|
Power Supply
|
Standard P/S2 ATX/EPS power supply unit
1. Intake airflow hole with dust filter.
2. Available for face upward and downward installation.
3. Within anti-vibration rubber. |
|
Cooling System
|
Water pipe holes x4 (with rubber cover) |
Front Fan: 120mm white LED with orange blades x1 (Preinstalled)
(80/90/140mm fan is available) |
Rear Fan: 120mm white LED with orange blades x1 (Preinstalled)
(80/90 fan is available) |
| Side Fan: 80/90/120/140mm fan x1 (optional) |
| Bottom Fan: 120/140mm fan x1 (optional) |
| Top Fan: 120/140mm fan x2(optional) |
| Fan Speed Control: Three fan speeds are adjustable synchronously by one knob on back bracket. |
|
I/O Panel
|
Top Panel: Power On/Off switch and reset button
Front Panel: USB2.0 x2, e-SATA x1, Audio out x1, Microphone x1
|
|
|
Perhatian: 
Catalog 
